If the makeup airbrush kit is not emptied immediately after use, will it cause the airbrush kit to become clogged?

If residual cosmetics are not poured out in a timely manner after using the makeup airbrush kit, it may cause blockage of the airbrush kit. The specific reasons are as follows:
1. Cosmetics will quickly dry up
Common cosmetics such as foundation and water-based pigments dry quickly.
If not removed in a timely manner, the residue will solidify into a film or clump in the spray cup, nozzle, or pipeline.
2. The nozzle is a high-precision component that is prone to clogging
The nozzle aperture is very small (usually less than 0.3mm), and any small dry residue may cause blockage.
After blocking, there will be no liquid spraying, uneven spray or oblique spray.
3. The needle is in close contact with the nozzle, and residues may adhere
After cosmetics dry up, they may cause the spray needle and nozzle to "stick", resulting in trigger jamming or inability to push.
In severe cases, it is necessary to disassemble and clean or replace the spray needle.
4. Long term uncleanliness affects the lifespan of the airbrush
Repeated residual drying and blockage will increase the wear of metal components and shorten their service life.
The maintenance cost of airbrushs is high, and if not cleaned in a timely manner, it will be even more expensive.
5. Subsequent use will affect the makeup effect
Blockage will lead to unstable air flow, coarse spray particles, uneven makeup effect and mottled.
Makeup colors may also be mixed with old colors, affecting the quality of cosmetics.